XDL09-9-204 Datasheet, PDF (1/3 Pages) Anaren Microwave – Stable over Temperature

Model XDL09-9-204
Rev. E
Delay Line
Description
The XDL09-9-204 is a surface mount delay line that uses a slow wave
coupling structure that maximizes the amount of delay per unit area over
other distributed delay structures. The XDL09-9-204 can be used in
amplifier linearization applications from 869 – 894 MHz. The XDL09-9-204
is ideal for the delay element required in the main loop of feed forward
amplifiers. The Xinger® delay lines are a low cost, high quality alternative to
the traditional coaxial and filter solutions presently available. Parts have
been subjected to rigorous qualification testing and units are 100% tested.
Produced with 5 of 6 tin lead.
Features:
ELECTRICAL SPECIFICATIONS
Frequency (MHz.)
869-894
AMPS Band
• Production Friendly
• Consistent Delay
• Stable over Temperature
• Surface Mountable
• Available in Tape & Reel
• Non-Lead Solder Paste
Compatible
• 100% Tested
Mean Delay (nS)
Deviation from Linear Phase (Degrees
Max)
Amplitude Flatness
(dB p-p)
Return Loss (dB min)
Insertion Loss (dB/nS)
20.25 ± 0.40
± 1.00
0.20
20
0.35
Power Handling (Watts)
1
ΘJC (°C/watts)
1.58
Operating Temp. (°C)
-55 to +85
Mechanical Drawing
Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω
nominal impedance. Specifications subject to change without notice.
GND
Top View (Near-side)
2.000±.010
[50.80±0.25]
Side View
.085±.017
[2.16±0.43]
Hot
Hot
Via
Via
Bottom View (Far-side)
3X .037±.004
[0.94±0.10]
1.000±.010
[25.40±0.25]
.848±.004
[21.54±0.10]
Denotes
Array Number
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
XDL09-9-204 Mechanical Outline
Pin 2
3X .070±.004 SQ
[1.78±0.10]
1.848±.004
[46.94±0.10]
Tolerances are Non-Cumulative
Pin 1
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada: _[phone]
Toll Free: _[phone]
Europe: [phone]