XDL09-8-080 Datasheet, PDF (1/3 Pages) Anaren Microwave – Production Friendly

Model XDL09-8-080
Rev.C
Delay Line
Features:
• Production Friendly
• Consistent Delay
• Stable Over Temperature
• Surface Mountable
• Available in Tape & Reel
• Non-Lead Solder Paste
Compatible
• Available in Lead-Free as
illustrated) or Tin-Lead
• 100% Tested
OUTLINE DRAWING
DESCRIPTION
The XDL09-8-080 is a surface mount delay line that uses a slow wave
coupling structure that maximizes the amount of delay per unit area over
other distributed delay structures. The XDL09-8-080 can be used in
amplifier linearization applications from 869 – 960MHz. The XDL09-8-080 is
ideal for use in the main loop of feed forward and in pre-distortion
amplifiers. The Xinger® delay lines are a low cost, high quality alternative to
the traditional coaxial and filter solutions presently available. Parts have
been subjected to rigorous qualification testing and units are 100% tested.
Available in 6 of 6 tin immersion (XDL09-8-080S) RoHS compliant finishes.
ELECTRICAL SPECIFICATIONS
Frequency (MHz.)
869-894
AMPS Band
Mean Delay (nS)
8.04 ± 0.18
925–960
GSM Band
8.22 ± 0.18
Deviation from Linear Phase
(Degrees Max)
± 1.0
± 1.0
Amplitude Flatness
(dB p-p)
0.10
0.15
Return Loss (dB min)
Insertion Loss (dB/nS)
20
20
0.45
0.45
Power Handling (Watts)
1
1
ΘJC (°C/watts)
5
5
Operating Temp. (°C)
-55 to +85
-55 to +85
Specification based on performance of unit properly installed on microstrip printed circuit boards
with 50 Ω nominal impedance. Specifications subject to change without notice.
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada: _[phone]
Toll Free: _[phone]
Europe: [phone]