XC0900L-03 Datasheet, PDF (1/24 Pages) Anaren Microwave – Tight Amplitude Balance

Model XC0900L-03
Rev B
Hybrid Coupler
3 dB, 90°
Description
The XC0900L-03 is a low profile, high performance 3dB hybrid coupler in
a new easy to use, manufacturing friendly surface mount package. It is
designed for AMPS band applications. The XC0900L-03 is designed
particularly for balanced power and low noise amplifiers, plus signal
distribution and other applications where low insertion loss and tight
amplitude and phase balance is required. It can be used in high power
applications up to 225 Watts.
Parts have been subjected to rigorous qualification testing and they are
manufactured using materials with coefficients of thermal expansion (CTE)
compatible with common substrates such as FR4, G-10, RF-35, and
RO4350. Available in both 5 of 6 tin lead (XC0900L-03P) and 6 of 6 tin
immersion (XC0900L-03S) RoHS compliant finishes.
Electrical Specifications **
Features:
• 800 – 1000 MHz
Frequency Isolation
Insertion
Loss
VSWR
Amplitude
Balance
• AMPS
MHz
dB Min
dB Max
Max : 1
dB Max
• High Power
• Very Low Loss
• Tight Amplitude Balance
• High Isolation
• Production Friendly
• Tape and Reel
800 - 1000
869 - 894
925 - 960
Phase
23
25
25
Power
0.16
0.12
0.12
ΘJC
1.15
1.12
1.12
Operating
Temp.
± 0.17
± 0.13
± 0.13
• Available in Lead-Free (as
illustrated) or Tin-Lead
• Reliable, FIT=0.53
Degrees
90 ± 2.0
90 ± 2.0
Avg. CW Watts
175
225
ºC/Watt
15
15
ºC
-55 to +95
-55 to +95
90 ± 2.0
225
15
-55 to +95
**Specification based on performance of unit properly installed on Anaren Test Board 57904-0001 with small
signal applied. Specifications subject to change without notice. Refer to parameter definitions for details.
Pin 1
Top View (Near-Side)
Side View
.650±.010
[16.51±0.25]
.069±.014
[1.75±0.35]
Pin 2
Pin 2
Orientation
Marker Denotes
Pin 1
.480±.010
[12.19±0.25]
.350±.004
[8.89±0.10]
Bottom View (Far-Side)
4X .040±.004
[1.02±0.10]
Pin 1
GND
4X .059±.004 SQ
[1.50±0.10]
Pin 4
Denotes
Array Number ^GND
Dimensions are in Inches [Millimeters]
XC0900L-03* Mechanical Outline
Pin 3
Pin 3
.520±.004
[13.21±0.10]
Pin 4
*For RoHS Compliant Versions order with S suffix
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]