X2A Datasheet, PDF (1/2 Pages) Anaren Microwave – SMT Crossover

Model X2A
Rev. B
SMT Crossover
Description
The X2A is a low profile crossover to intersect an RF and DC circuit trace in
an easy to use surface mount package designed for frequencies up to 6
GHz. The X2A is ideal for any application where an RF circuit must intersect
with a DC circuit without resorting to a multilayer PCB. Parts have been
subjected to rigorous qualification testing and units are 100% tested. They
are manufactured using materials with x and y thermal expansion
coefficients compatible with common substrates such as FR4, G-10 and
polyamide.
Features:
• DC – 6.0 GHz
• RF – DC Crossover
• Low Loss
• DC Isolation
• Surface Mountable
• Tape And Reel
• Convenient Package
• 100 % Tested
Outline Drawing
ELECTRICAL SPECIFICATIONS**
Frequency
Port Impedance Return Loss
GHz
Ohms
dB Min
DC – 2.5
50
20
2.5 – 4.0
4.0 – 6.0
Insertion Loss
dB Max
50
50
Power
Watts
20
15
ΘJC
ºC / Watt
Operating
Temp.
ºC
0.05
30
250.9
-55 to +85
0.10
15
250.9
-55 to +85
0.15
10
250.9
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit boards
with 50 Ω nominal impedance. Specifications subject to change without notice.
Top View (Near-side)
Side View
Bottom View (Far-side)
.200±.010
[5.08±0.25]
.047±.005
[1.19±0.13]
GND
RF
IN / OUT
GND
.200±.010
[5.08±0.25]
RF
IN / OUT
GND
RF
IN / OUT
.039±.004
[1.00±0.10]
GND
2X .026±.004
[0.65±0.10]
GND
2X .056±.004
[1.42±0.10]
RF
IN / OUT
GND
4X .033±.008 SQ
[0.83±0.20]
Dimensions are in Inches [Millimeters]
X2A Mechanical Outline
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]