RFP-050100-2X50-2_1 Datasheet, PDF (1/2 Pages) Anaren Microwave – Chip Termination 5 Watts, 50ohm

Features:
• 5 Watts
• Lowest Cost
• BeO Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Model RFP-050100-2X50-2
Chip Termination
5 Watts, 50Ω
General Specifications
Resistive Element
Thick film
Substrate
BeO Ceramic
Terminal Finish
Matte Tin over Nickel
Operating Temperature -55 to +125°C (see chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 ohms, ± 2%
Power:
5 Watts
Frequency Range:
DC – 4.0 GHz
V.S.W.R.:
1.25:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance.
Tolarence is ±0.010inches.
Specifications subject to change without notice
Outline Drawing
All dimensions are in inches.
050100-2X50-2 (097) Rev B pg. 1 of 2
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]