PD6080J5050S2HF Datasheet, PDF (1/5 Pages) Anaren Microwave – Non-conductive Surface

Model PD6080J5050S2HF
Rev B
Ultra Low Profile 0805 Power Divider
50Ω to 50Ω
Description
The PD6080J5050S2HF is a low profile, sub-miniature Wilkinson power divider in
an easy to use surface mount package. The PD6080J5050S2HF is ideal for high
volume manufacturing and delivers higher performances than traditional printed and
lumped element solutions. The PD6080J5050S2HF is matched to 50 Ω and has a
height profile of 0.5 mm which is ideal for high level integrations in the following
markets: RFID, fixed satellite, and mobile satellite. The PD6080J5050S2HF does
not include the resistive element and therefore, requires an external resistor for
operation. The PD6080J5050S2HF is available on tape and reel for high volume
manufacturing pick and place.
Detailed Electrical Specifications: Specifications subject to change without notice.
Features:
ROOM (25°C)
• 6000-8000 MHz
• 15 dB Isolation (output ports)
• Good Return Loss
• 0.5mm Height Profile
• 50Ω Input / 50Ω Outputs
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• Halogen Free
Parameter
Frequency
Input Port Impedance
Output Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
Isolation (Output Ports)
Power Handling
Min.
6000
9
12
Typ.
50
50
12
0.6
0.2
2
15
Max
8000
0.9
0.5
5
2
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
0.44±0.04
4x 0.37
BOTTOM VIEW (Far Side)
1
2
3
2x 0.15
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
1.29±0.10
6x 0.98
6x
0.22
Orientation Marker
Denotes Pin Location
Mechanical Outline
-Dimensions are in Millimeters
Orientation Marker
6
5
4
6x
Denotes Pin Location _{4x 0.65}
0.30
Pin Designation
1 GND
2 Input
3 GND
4 Output 1
5 GND
6 Output 2
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
[phone]
[phone]
[phone]
[phone]