English
Language : 

PD0922J5050D2HF Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 Power Divider
Model PD0922J5050D2HF
Rev A
Ultra Low Profile 0805 Power Divider
50Ω to 50Ω
Description
The PD0922J5050D2HF is a low profile, sub-miniature Wilkinson power divider in
an easy to use surface mount package and is ideal for high volume manufacturing
while delivering higher performances than traditional printed and lumped element
solutions. It has been designed for the following markets: DVB-S, GSM, DCS, PCS,
CDMA and GPS.
The PD0922J5050D2HF is matched to 50 Ω and has a height profile of 0.8 mm
which is ideal for high level integrations. A 2 section Wilkinson design results in
increased isolation performance. Two external resistors are required for operation.
Components are available on tape and reel for high volume manufacturing pick and
place.
Detailed Electrical Specifications: Specifications subject to change without notice.
Features:
ROOM (25°C)
• 950 – 2150 MHz
• 12dB Isolation (output ports)
• Good Return Loss
• 0.8mm Height Profile
• 50Ω Outputs/Inputs
Parameter
Frequency
Input Port Impedance
Output Port Impedance
Min.
950
Typ.
50
50
Max
2150
• External resistors required
Return Loss
9.3
11
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• Halogen Free
Insertion Loss*
Amplitude Balance
Phase Balance
Isolation (Output Ports)
Power Handling
0.7
0.8
0.1
0.5
1
3
10.5
12
2
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
0.85±0.08
4x 0.37
BOTTOM VIEW (Far Side)
1
2
3
2x 0.15
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
1.29±0.10
6x 0.98
6x
0.22
Orientation Marker
Denotes Pin Location
Mechanical Outline
-Dimensions are in Millimeters
Orientation Marker
6
5
4
6x
Denotes Pin Location 4x 0.65
0.30
Pin Designation
1 Output 1
2 Input
3 Mid 2
4 Mid 1
5 GND
6 Output 2
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282