English
Language : 

K100N50X4B Datasheet, PDF (1/2 Pages) Anaren Microwave – 100 Watts
Features:
 RoHS Compliant
 100 Watts
 DC – 4.0 GHz
 AlN Ceramic
 Non-Nichrome Resistive
Element
 Low VSWR
 100% Tested
Outline Drawing
Model K100N50X4B
Half Flange Termination
100 Watts, 50
Description
The K100N50X4B is high performance Aluminum Nitride (AlN) half flange
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element
Thick Film
Substrate
AlN Ceramic
Mounting Flange
Copper, nickel plated per QC-N-290
Operating Temperature -55°C to +150°C (see de rating chart)
Tolerance is 0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms,  2%
Power:
100 Watts
Frequency Range:
DC – 4.0 GHz
Return Loss
> 26 dB to 1.3 GHz
> 22 dB to 4.0GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change with out notice.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
LEAD LENGTH: 0.150” MIN
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
1 of 2