JP503_14 Datasheet, PDF (1/6 Pages) Anaren Microwave – Hybrid Couplers

Model JP503
Rev. D
Hybrid Couplers
3 dB, 90°
Description
The JP503 Pico Xinger is a low profile, miniature 3dB hybrid coupler in an
easy to use surface mount package designed for W-CDMA and other 3G
applications. The JP503 is designed for balanced amplifiers, variable
phase shifters and attenuators, LNAs, signal distribution and is an ideal
solution for the ever-increasing demands of the wireless industry for smaller
printed circuit boards and high performance. Parts have been subjected to
rigorous qualification testing and units are 100% tested. They are
manufactured using materials with x and y thermal expansion coefficients
compatible with common substrates. Available in both 5 of 6 tin lead
(JP503) and 6 of 6 RoHS compliant tin immersion (JP503S).
Features:
• 2.0 – 2.3 GHz.
• 3G Frequencies
• Low Loss
• High Isolation
• 90o Quadrature
• Surface Mountable
• Tape And Reel
• Available in Lead-Free (as
illustrated) or Tin-Lead
Mechanical Outline
ELECTRICAL SPECIFICATIONS**
Frequency Isolation
Insertion
Loss
GHz
dB Min
dB Max
VSWR
Max:1
2.0 – 2.3
20
0.30
1.20
1.9 - 2.4
Amplitude
Balance
dB Max
20
Phase
Balance
Degrees
0.30
Power
Ave. CW Watts
1.25
ΘJC
ºC/Watt
Operating
Temp.
ºC
± 0.25
±3
25
27.5
-55 to +85
± 0.25
±3
25
27.5
-55 to +85
**Specification based on performance of unit properly installed on microstrip printed circuit boards
with 50 Ω nominal impedance. Specifications subject to change without notice.
Pin 1
.250±.010
[6.35±0.25]
.053±.011
[1.34±0.27]
Pin 2
GND
.200±.010
[5.08±0.25]
Pin 4
Denotes Array
Number
Pin 3
Dimensions are in Inches [Millimeters]
JP503* Mechanical Outline
Pin 2
4X .020±.004
[0.51±0.10]
.120±.004
[3.05±0.10]
Pin 3
.170±.004
[4.32±0.10]
Pin 1
GND
4X .040±.004 SQ
[1.01±0.10]
Pin 4
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]