English
Language : 

H100NA30X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Flange Attenuator
Features:
• RoHS Compliant
• 100 Watts
• DC – 4.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Outline Drawing
ROHS
Compliant
Model H100NA30X4
Flange Attenuator
100 Watts, 30 dB
Description
The H100NA30X4 is high performance Aluminum Nitride (AlN) high power
flange mount attenuator intended as a cost competitive alternative to
Beryllium Oxide (BeO). The termination is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The
high power handling makes the part ideal for terminating circulators, and
for use in power monitoring. The termination is also RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
Cover
Mounting Flange
AlN Ceramic
Alumina Ceramic
Nickel Plated Copper
Operating Temperature -55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value:
30 dB, +5/-2 dB, DC - 2.2 GHz
30 dB, +7/-2 dB, 2.2 GHz – 2.7 GHz
Power:
100 Watts
Frequency Range:
DC – 2.7 GHz
Return Loss
>24 dB to 2.2 GHz
>20 dB to 4.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
USA/Canada:
Toll Free:
Europe:
H100NA30X4 (097) rev.B pg. 1 of 2
(315) 432-8909
(800) 544-2414
+44 2392-232392