G450N50W4 Datasheet, PDF (1/2 Pages) Anaren Microwave – RoHS Compliant

Features:
• RoHS Compliant
• 450 Watts
• DC – 1.7 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model G450N50W4
Description
Flange Mount Termination
450 Watts, 50Ω
The G450N50W4 is high performance Aluminum Nitride (AlN) flange
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is also RoHS compliant!
General Specifications
Resistive Element
Substrate
Mounting Flange
Thick Film
AlN Ceramic
Nickel Plated Copper
Operating Temperature -50 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
450 Watts
Frequency Range:
DC – 1.7GHz
Return Loss
>20dB
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
USA/Canada:
Toll Free:
Europe:
1 of 2
[phone]
[phone]
[phone]