G150N50W4A Datasheet, PDF (1/2 Pages) Anaren Microwave – Flange Mount Termination 150 Watts, 50Ω

Features:
• RoHS Compliant
• 150 Watts
• DC - 2.7 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
ROHS
Compliant
Model G150N50W4A
Flange Mount Termination
150 Watts, 50Ω
Description
The G150N50W4A is high performance Aluminum Nitride (AlN) flange
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency bands
such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power
handling makes the part ideal for terminating circulators, and for use in
power combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element
Thick Film
Substrate
AlN Ceramic
Cover
Alumina Ceramic
Mounting Flange
Nickel Plated Copper
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
150 Watts
Frequency Range:
DC – 2.7 GHz
Return Loss
>26 dB to 2.0 GHz
>17 dB to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Lead Length: 0.150 Min
Rev. 10/12/05
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]