English
Language : 

G100N50W4 Datasheet, PDF (1/2 Pages) Anaren Microwave – RoHS Compliant
Features:
• RoHS Compliant
• 100 Watts
• DC – 3 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model G100N50W4
Flange Mount Termination
100 Watts, 50Ω
Description
The G100N50W4 is high performance Aluminum Nitride (AlN) flange
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency bands
such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power
handling makes the part ideal for terminating circulators and for use in
power combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element
Thick Film
Substrate
AlN Ceramic
Mounting Flange
Nickel Plated Copper
Operating Temperature -55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
100 Watts
Frequency Range:
DC – 3.0 GHz
Return Loss
25dB to 2.0 GHz
20dB to 3.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
USA/Canada:
Toll Free:
Europe:
1 of 2
(315) 432-8909
(800) 544-2414
+44 2392-232392