E250N50X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – RoHS Compliant

Features:
• RoHS Compliant
• 250 Watts
• DC – 2.2GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model E250N50X4
Description
Flangeless Termination
250 Watts, 50Ω
The E250N50X4 is high performance Aluminum Nitride (AlN) termination
intended as a cost competitive alternative to Beryllium Oxide (BeO). The
termination is well suited to all cellular frequency bands such as; AMPS,
GSM, DCS, PCS, PHS and UMTS. The high power handling makes the
part ideal for terminating circulators and for use in power combiners. The
termination is also RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
AlN Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature -50 to +200°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified.±± Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
250 Watts
Frequency Range:
DC – 2.2 GHz
Return Loss
> 20 dB DC – 2.2 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
1 of 2