E150N50X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Flangeless Mount Termination 150 Watts, 50W

Features:
• RoHS Compliant
• 150 Watts
• DC – 2.7GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
ROHS
Compliant
Model E150N50X4
Flangeless Mount Termination
150 Watts, 50Ω
Description
The E150N50X4 is high performance Aluminum Nitride (AlN) termination
intended as a cost competitive alternative to Beryllium Oxide (BeO). The
termination is well suited to all cellular frequency bands such as; AMPS,
GSM, DCS, PCS, PHS and UMTS. The high power handling makes the
part ideal for terminating circulators, and for use in power combiners. The
termination is also RoHS compliant!
General Specifications
Resistive Element
Thick Film
Substrate
AlN Ceramic
Finish
Matte Tin over Nickel
Cover
Alumina Ceramic
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
150 Watts
Frequency Range:
DC – 2.7 GHz
Return Loss
> 25 dB DC – 2.0 GHz
> 20 dB DC – 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
E150N50X4 (097) rev.E pg. 1 of 2
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]