D8NAXXY4 Datasheet, PDF (1/3 Pages) Anaren Microwave – Surface Mount Attenuator 8 Watts

Features:
• RoHS compliant
• Low Cost
• Surface Mount
• Aluminum Nitride Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model D8NAXXY4
Surface Mount Attenuator
8 Watts
Description
The D8NAXXY4 is high performance Aluminum Nitride (AlN) surface
mount attenuator intended as a lower cost alternative to Beryllium Oxide
(BeO). The attenuator is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for inter-stage matching, directional couplers, and for
use in isolators.
General Specifications
Resistive Element
Thick film
Substrate
Terminal Finish
Aluminum Nitride Ceramic
Matte Tin over Sulfamate Nickel
Operating Temperature -55 to +150°C (see chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value:
1 – 6, 9, 10dB
Power:
8 Watts
Frequency Range:
DC – 2.0 GHz
V.S.W.R.:
<1.25:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Dimensions given in inches.
Available on Tape
and Reel For Pick and
Place Manufacturing.
Rev. 2/23/06
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]