D30AXXY4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Surface Mount Attenuator 30 Watts

Features:
• 30 Watts
• Lowest Cost
• True Surface Mount
• Alumina Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
RoHS
Model D30AXXY4
Compliant
Surface Mount
Attenuator
Description
30 Watts
The D30AXXY4 is high performance Alumina (Al2O3) surface mount
attenuator intended as a lower cost alternative to Aluminum Nitride (AlN)
and Beryllium Oxide (BeO). The attenuator is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The
high power handling makes the part ideal for inter-stage matching,
directional couplers, and for use in isolators.
General Specifications
Resistive Element
Thick film
Substrate
Alumina Ceramic
Terminal Finish
Matte Tin over Sulfamate Nickel
Operating Temperature -55 to +150°C (see chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value:
20 & 30dB
Power:
30 Watts
Frequency Range:
DC – 2.0 GHz
V.S.W.R.:
1.20:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Dimensions given in inches.
Available on Tape
and Reel For Pick and
Place Manufacturing.
D30AXXY1 (097) Rev B
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]