D10AAXXZ4 Datasheet, PDF (1/3 Pages) Anaren Microwave – Surface Mount Attenuator

Features:
• RoHS compliant
• Lowest Cost
• True Surface Mount
• Alumina Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model D10AAXXZ4
Surface Mount Attenuator
7 Watts
Description
The D10AAXXZ4 is high performance Alumina (Al2O3) surface mount
attenuator intended as a lower cost alternative to Aluminum Nitride (AlN)
and Beryllium Oxide (BeO). The attenuator is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The
high power handling makes the part ideal for inter-stage matching,
directional couplers, and for use in isolators.
General Specifications
Resistive Element
Thick film
Substrate
Terminal Finish
Alumina Ceramic
Matte Tin over Sulfamate Nickel
Operating Temperature -55 to +125°C (see chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value:
1 – 6, 9, 10, 20 & 30dB
Power:
7 Watts
Frequency Range:
DC – 3.0 GHz
V.S.W.R.:
<1.25:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
.045
REF.
.045
REF.
.035
.005
.100
REF.
A
SIDE VIEW
.025
.100
.100
REF.
.030
A ^.035
.005
SIDE VIEW
.100
.045
.025
182 .140 .080
C
.175
D
.200
REF.
B
BOTTOM VIEW
.090
REF.
SIDE VIEW
.200 .090
.182
.045
TOP VIEW
.035
.182 .140 .080
.009
.010
B
C
.175
D
.200
REF.
BOTTOM VIEW
.090
REF.
.200 .190 .090
.009
SIDE VIEW
.045
TOP VIEW
FOR PART NUMBERS D10AA9Z4 AND D10AA10Z4
Dimensions given in inches.
FOR PART NUMBERS D10AA20Z4 AND D10AA30Z4
Available on Tape
and Reel For Pick and
Place Manufacturing.
Rev. 6/24/05
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]