|
D10AA1Z4_11 Datasheet, PDF (1/2 Pages) Anaren Microwave – Surface Mount Attenuator 10 Watts | |||
|
Features:
⢠RoHS Compliant
⢠10 Watts
⢠Low Cost
⢠DC â 3.0GHz
⢠Alumina Ceramic
⢠Non-Nichrome Resistive
Element
⢠Low VSWR
⢠100% Tested
Outline Drawing
Model D10AAXXZ4
Surface Mount Attenuator
10 Watts
The D10AAXXZ4 is high performance Alumina (Al2O3) surface mount
attenuator intended as a lower cost alternative to Aluminum Nitride (AlN)
and Beryllium Oxide (BeO). The attenuator is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The
high power handling makes the part ideal for inter-stage matching,
directional couplers, and for use in isolators.
General Specifications
Resistive Element
Thick film
Substrate
Alumina Ceramic
Terminal Finish
Matte Tin over Sulfamate Nickel
Operating Temperature -55 to +125°C (see de rating chart)
Tolerance is ±0.010â, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value:
1 â 7, 9, 10, 20 & 30dB
Power:
10 Watts
Frequency Range:
DC â 3.0GHz
VSWR
<1.25:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
THE D10AAxxZ4 SERIES OF ATTENUATORS ARE SYMMETRICAL
UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
|
▷ |