C20N50Z4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Surface Mount Termination

Features:
RoHS Compliant
20 Watts
DC - 2.3 GHz
AlN Ceramic
Non-Nichrome Resistive
Element
Low VSWR
100% Tested
Small Size
Outline Drawing
Description
Model C20N50Z4
5Z2050
Surface Mount Termination
20 Watts, 50
The C20N50Z4 is high performance Aluminum Nitride (AlN) surface
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency
bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high
power handling makes the part ideal for terminating high power 90
degree couplers and for use in microstrip circuits. The termination is also
RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
AlN Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature -50 to +200 C (see de rating chart)
Tolerance is 0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, 2%
Power:
20 Watts
Frequency Range:
DC – 2.3 GHz
Return Loss
>20 dB to 2.3 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
1 of 2
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]