C20A50Z4 Datasheet, PDF (1/2 Pages) Anaren Microwave – RoHS Compliant

Features:
• RoHS Compliant
• 20 Watts
• DC – 4.0 GHz
• Al₂O₃ Ceramic
• Non-Nichrome Resistive
Element
• Low Return Loss
• 100% Tested
• Small Size
Outline Drawing
Model C20A50Z4
Surface Mount Termination
20 Watts, 50Ω
Description
The C20A50Z4 is high performance Alumina (Al₂O₃) surface mount
termination intended as a cost competitive alternative to Aluminum
Nitride (AlN). The termination is well suited to all cellular frequency
bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high
power handling makes the part ideal for terminating high power 90
degree couplers and for use in microstrip circuits. The termination is also
RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
Terminal Finish
Al₂O₃ Ceramic
Matte Tin over Nickel Barrier
Operating Temperature -50 to +125°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
20 Watts
Frequency Range:
DC – 4.0 GHz
Return Loss
>26 dB DC – 4.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
Available on Tape
and Reel For Pick and
Place Manufacturing.
1 of 2
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]