C1720J5003AHF Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler

Model C1720J5003AHF
Rev B
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C1720J5003AHF is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. It is designed
for PCS, DCS, DECT, and WCDMA-3G applications. The C1720J5003AHF is ideal
for balanced power and low noise amplifiers, plus signal distribution and other
applications where low insertion loss and tight amplitude and phase balance are
required. The C1720J5003AHF is available on tape and reel for pick and place high
volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability. All parts
have been subjected to rigorous qualification testing and units are 100% RF tested.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min. Typ. Max
• 1700 – 2000 MHz
Frequency
•
•
0.7mm Height Profile
PCS, DCS, DECT, & WCDMA-3G
Port Impedance
• High Isolation & Low Loss
Return Loss
• Surface Mountable
Isolation
1700
2000
50
21
27
24
36
• Tape & Reel
Insertion Loss*
0.3
0.4
• Non-conductive Surface
• RoHS Compliant
• Halogen-Free
Amplitude Balance
Phase Balance (relative to 90°)
Power Handling
0.2
1.0
1
5
4
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Nearside)
2.04±0.10
Side View
0.70±0.07
4x 0.37
Bottom View (Farside)
1
2
3
2x 0.15
Unit
MHz
Ω
dB
dB
dB
dB
Degrees
Watts
ºC
1.29±0.10
6x 0.98
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
Pin Configuration-1 Configuration-2 Configuration-3 Configuration-4
1 Input
Isolated
Direct
Coupled
2 GND
GND
GND
GND
3 Isolated
Input
Coupled
Direct
4 Direct
Coupled
Input
Isolated
5 GND
GND
GND
GND
6 Coupled
Direct
Isolated
Input
6
5
4x 0.65
6x 0.22
4
6x 0.30
Mechanical Outline
-Dimensions are in Millimeters
-Tolerances are Non-Cumulative
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
[phone]
[phone]
[phone]
[phone]