C1517J5003AHF Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 3 dB, 90° Hybrid Coupler

Model C1517J5003AHF
Rev D
Ultra Low Profile 0805
3 dB, 90° Hybrid Coupler
Description
The C1517J5003AHF is a low cost, low profile sub-miniature high
performance 3 dB coupler in an easy to use surface mount package. The
C1517J5003AHF is ideal for balanced power and low noise amplifiers, plus signal
distribution and other applications where low insertion loss and tight amplitude and
phase balance are required. The C1517J5003AHF is available on tape and reel for
pick and place high volume manufacturing.
All of the Xinger components are constructed from ceramic filled PTFE
composites which possess excellent electrical and mechanical stability. All parts
have been subjected to rigorous qualification testing and units are 100% RF tested.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 1500 – 1700 MHz
• 0.7mm Height Profile
• High Isolation & Low Loss
• LTE Bands: 24
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• Halogen-Free
• 100% RF Tested
• -55°C to 85°C
Parameter
Frequency
Port Impedance
Return Loss
Isolation
Insertion Loss*
Amplitude Balance
Phase Balance (relative to 90°)
Power Handling
Operating Temperature
Min.
1500
21
24
-55
Typ.
50
25
28
0.2
0.4
0.7
Max
1700
0.3
1.0
4
4
+85
Unit
MHz
Ω
dB
dB
dB
dB
Degrees
Watts
ºC
Group Delay
(1.5-1.7GHZ)
(nSec)
Min.
0.093
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Typ.
0.108
Max
0.123
Top View (Nearside)
2.04±0.10
Side View
0.70±0.07
4x 0.37
Bottom View (Farside)
1
2
3
2x 0.15
1.29±0.10
6x 0.98
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
Pin Configuration-1 Configuration-2 Configuration-3 Configuration-4
1 Input
Isolated
Direct
Coupled
2 GND
GND
GND
GND
3 Isolated
Input
Coupled
Direct
4 Direct
Coupled
Input
Isolated
5 GND
GND
GND
GND
6 Coupled
Direct
Isolated
Input
6
5
4x 0.65
6x 0.22
4
6x 0.30
Mechanical Outline
-Dimensions are in Millimeters
-Tolerances are Non-Cumulative
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
[phone]
[phone]
[phone]
[phone]