C100N50Z4A Datasheet, PDF (1/3 Pages) Anaren Microwave – Surface Mount Termination 100 Watts, 50Ω

Features:
• RoHS Compliant
• 100 Watts
• DC – 4.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Outline Drawing
Model C100N50Z4A
Surface Mount Termination
100 Watts, 50Ω
Description
The C100N50Z4A is high performance Aluminum Nitride (AlN) surface
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency
bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high
power handling makes the part ideal for terminating high power 90
degree couplers and for use in microstrip circuits. The termination is also
RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
AlN Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature -55 to +200°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
100 Watts
Frequency Range:
DC – 4.0 GHz
Return Loss
>24 dB DC - 2.7 GHz
>20 dB DC - 4.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
Available on Tape
and Reel For Pick and
Place Manufacturing.
1 of 2
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]