BD4859N50100A00 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0404 Balun 50Ω to 100Ω Balanced

Model BD4859N50100A00
Rev D
Ultra Low Profile 0404 Balun
50Ω to 100Ω Balanced
Description
The BD4859N50100A00 is a low cost, low profile sub-miniature unbalanced to
balanced transformer designed for differential inputs and output locations on modern
chipsets in an easy to use surface mount package covering 802.11a Uni-Band II &
III and the Japanese ISM band (4.9 GHz). The BD4859N50100A00 is ideal for high
volume manufacturing and delivers higher performance than traditional ceramic
baluns. The BD4859N50100A00 has an unbalanced port impedance of 50Ω and a
100Ω balanced port impedance. This transformation enables single ended signals to
be applied to differential ports on modern integrated chipsets. The output ports have
equal amplitude (-3dB) with 180 degree phase differential. The BD4859N50100A00
is available on tape and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 4800 – 5900 MHz
• 0.65mm Height Profile
• 50 Ohm to 2 x 50 Ohm
• Low Insertion Loss
• 802.11a Uni-Band II & III
• Home Cordless Compliant
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Power Handling
Min.
4800
15
Typ.
50
100
20
0.4
0.9
3
26
Max
5900
0.6
1.5
8
1
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
.041^+-..000023
[ ] ^{1.05+-00..0068}
.041^+-..000023
[ ] ^{1.05+-00..0068}
Dimensions are in Inches [Millimeters]
Mechanical Outline
.024±.0025
.012 [0.30]
[0.62±0.064] _{0.12 [0.30]} ¹
2
3x.010
[0.25]
Pin Designation
1
GND / DC Feed
+ RF GND
2 Unbalanced Port
3 Balanced Port
4 Balanced Port
4
4X .020 [0.50]
3
3x.010
[0.25]
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]