BD3150L50100A00 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Small Low Profile 0603 Balun 50Ω to 100Ω Balanced

Model BD3150L50100A00
Rev C
Ultra Small Low Profile 0603 Balun
50Ω to 100Ω Balanced
Description
The BD3150L50100A00 is an ultra-small low profile balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering the MMDS and
the low end of the UWB frequency ranges. The BD3150L50100A00 is ideal for high
volume manufacturing and is higher performance than traditional ceramic baluns.
The BD3150L50100A00 has an unbalanced port impedance of 50Ω and a 100Ω
balanced port impedance. This transformation enables single ended signals to be
applied to differential ports on modern integrated chipsets. The output ports have
equal amplitude (-3dB) with 180 degree phase differential. The BD3150L50100A00
is available on tape and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 3100 – 5000 MHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 50 Ohm
• UWB & MMDS
• Low Insertion Loss
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Min.
3100
9.5
Typ.
50
100
12
0.8
0.5
4.0
28
Max
5000
1.1
0.9
9.0
Power Handling
2
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
.059±.004
[1.50±0.10]
.027±.002
[0.70±0.05]
.029±.004
[0.75±0.10]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Pin Designation
1 Unbalanced Port
2 DC Bias/GND
3 Balanced Port
4 Balanced Port
5 GND
6 GND
12
.020
[0.52]
65
.020
[0.50]
3
.008
[0.20]
4 _.010
[0.24]
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]