BD2326L50150A00 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Small Low Profile 0603 Balun 50Ω to 150Ω Balanced

Model BD2326L50150A00
Rev C
Ultra Small Low Profile 0603 Balun
50Ω to 150Ω Balanced
Description
The BD2326L50150A00 is an ultra-small low profile balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering 802.11b+g+n.
The BD2326L50150A00 is ideal for high volume manufacturing and is higher
performance than traditional ceramic baluns. The BD2326L50150A00 has an
unbalanced port impedance of 50Ω and a 150Ω balanced port impedance. This
transformation enables single ended signals to be applied to differential ports on
modern integrated chipsets. The output ports have equal amplitude (-3dB) with 180
degree phase differential. The BD2326L50150A00 is available on tape and reel for
pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 2300 – 2600 MHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 75 Ohm
• 802.11 b+g +n Compliant
• Low Insertion Loss
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Power Handling
Min.
2300
12
Typ.
50
150
17
0.8
0.5
4
29
Max
2600
1.1
1.0
10
2
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
.059±.004
[1.50±0.10]
.027±.002
[0.70±0.05]
.029±.004
[0.75±0.10]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Pin Designation
1 Unbalanced Port
2 DC Bias/GND
3 Balanced Port
4 Balanced Port
5 GND
6 GND
12
.020
[0.52]
65
.020
[0.50]
3
.008
[0.20]
4 _.010
[0.24]
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]