BD2130J5050A00 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun 50Ω to 50Ω Balanced

Model BD2130J5050A00
Rev A
Ultra Low Profile 0805 Balun
50Ω to 50Ω Balanced
Description
The BD2130J5050A00 is a low profile sub-miniature balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering 802.11b+g+n.
The BD2130J5050A00 is ideal for high volume manufacturing and is higher
performance than traditional ceramic and lumped element baluns. The
BD2130J5050A00 has an unbalanced port impedance of 50Ω and a 50Ω balanced
port impedance. This transformation enables single ended signals to be applied to
differential ports on modern semiconductors. The output ports have equal amplitude
(-3dB) with 180 degree phase differential. The BD2130J5050A00 is available on
tape and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications*: Specifications subject to change without notice.
Features:
ROOM (25°C)
• 2.1 – 3.0 GHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 25 Ohm
• 802.11 b & g +n Compliant
• Low Insertion Loss
Parameter
Frequency
Unbalanced Port Imp.
Balanced Port Imp.**
Min.
2.4
Typ.
50
50
Max Min.
2.5 2.1
• DCS, PCS & UMTS
Return Loss
12 17
10
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Insertion Loss***
Amplitude Balance
Phase Balance
Power Handling
0.75 0.9
0.45 0.65
2
5
2
Operating Temperature -55
+85 -55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Typ.
50
50
12
1.0
0.7
2
Top View (Near-side)
Side View
Bottom View (Far-side)
Max Unit
3.0 GHz
Ω
Ω
dB
1.2
dB
1.0
dB
5 Degrees
2
Watts
+85
ºC
.079^±.004
[2.00^±0.10]
.027±.002
[0.70±0.05]
.049±.004
[1.25±0.10]
.039 [0.98]
12
.026 [0.65]
3
6X .009
[0.22]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Orientation
Marker Denotes 6 5
4
Pin Designation
Pin Location
1 Unbalanced Port
6X .012
[0.30]
2 GND / DC Feed
+ RF GND
3 Balanced Port
4 Balanced Port
5 GND
6 NC
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]