BD1722J50200A00 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun 50Ω to 200Ω Balanced

Model BD1722J50200A00
Rev B
Ultra Low Profile 0805 Balun
50Ω to 200Ω Balanced
Description
The BD1722J50200A00 is a low profile sub-miniature balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering the DCS, PCS,
UMTS and CDMA frequencies. The BD1722J50200A00 is ideal for high volume
manufacturing and is higher performance than traditional ceramic and lumped
element baluns. The BD1722J50200A00 has an unbalanced port impedance of 50Ω
and a 200Ω balanced port impedance. This transformation enables single ended
signals to be applied to differential ports on modern semiconductors. The output
ports have equal amplitude (-3dB) with 180 degree phase differential. The
BD1722J50200A00 is available on tape and reel for pick and place high volume
manufacturing.
Detailed Electrical Specifications*: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 1.7 – 2.2 GHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 100 Ohm
• DCS/PCS/ UMTS/CDMA
• Low Insertion Loss
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance**
Return Loss
Insertion Loss***
Amplitude Balance
Phase Balance
Power Handling
Thermal Resistance
Min.
1.7
15
Typ.
50
200
20
0.5
0.6
4
Max
2.2
0.7
0.9
8
2
TBD
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
Unit
GHz
Ω
Ω
dB
dB
dB
Degrees
Watts
ºC / Watt
ºC
.079±.004
[2.00±0.10]
.027±.002
[0.70±0.05]
.049±.004
[1.25±0.10]
.039 [0.98]
12
.026 [0.65]
3
6X .009
[0.22]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Orientation
Marker Denotes 6 5
4
Pin Designation
Pin Location
1 Unbalanced Port
6X .012
[0.30]
2 GND / DC Feed
+ RF GND
3 Balanced Port
4 Balanced Port
5 GND
6 NC
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]