BD1722J50100A00 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun 50 to 100 Balanced

Model BD1722J50100A00
Rev C
Ultra Low Profile 0805 Balun
50Ω to 100Ω Balanced
Description
The BD1722J50100A00 is a low profile sub-miniature balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering the DCS, PCS,
UMTS and CDMA frequencies. The BD1722J50100A00 is ideal for high volume
manufacturing and is higher performance than traditional ceramic, and lumped
element baluns. The BD1722J50100A00 has an unbalanced port impedance of 50Ω
and a 100Ω balanced port impedance. This transformation enables single ended
signals to be applied to differential ports on modern semiconductors. The output
ports have equal amplitude (-3dB) with 180 degree phase differential. The
BD1722J50100A00 is available on tape and reel for pick and place high volume
manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 1700 – 2200 MHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 50 Ohm
• DCS/PCS/UMTS/CDMA
• Low Insertion Loss
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Power Handling
Min.
1700
9
Typ.
50
100
13
0.9
0.4
4
29
Max
2200
1.2
1.2
6
2
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
.079±.004
[2.00±0.10]
.027±.002
[0.70±0.05]
.049±.004
[1.25±0.10]
.039 [0.98]
12
.026 [0.65]
3
6X .009
[0.22]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Orientation
Marker Denotes 6 5
4
Pin Designation
Pin Location
1 Unbalanced Port
6X .012
[0.30]
2 GND / DC Feed
+ RF GND
3 Balanced Port
4 Balanced Port
5 GND
6 NC
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]