BD1631J50100A00 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun 50Ω to 100Ω Balanced

Model BD1631J50100A00
Rev B
Ultra Low Profile 0805 Balun
50Ω to 100Ω Balanced
Description
The BD1631J50100Aoo is a low profile sub-miniature balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering 802.11b+g+n,
GSM, DCS, PCS and UMTS. The BD1631J50100Aoo is ideal for high volume
manufacturing and is higher performance than traditional ceramic and lumped
element baluns. The BD1631J50100Aoo has an unbalanced port impedance of 50Ω
and a 100Ω balanced port impedance*. This transformation enables single ended
signals to be applied to differential ports on modern semiconductors. The output
ports have equal amplitude (-3dB) with 180 degree phase differential. The
BD1631J50100Aoo is available on tape and reel for pick and place high volume
manufacturing.
Detailed Electrical Specifications*: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 1.6 – 3.1 GHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 50 Ohm
• 802.11 b & g +n Compliant
• Low Insertion Loss
Parameter
Frequency
Unbalanced Port Imp.
Balanced Port Imp.**
Return Loss
Min.
2.0
12
Typ.
50
100
17.5
Max Min.
2.5 1.6
10
• DCS, PCS & UMTS
Compliant
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
Insertion Loss***
Amplitude Balance
Phase Balance
Power Handling
0.6 0.75
0.35 0.65
±2 ±5
2
• Non-conductive Surface
• RoHS Compliant
Operating Temperature -55
+85 -55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Typ.
50
100
13
0.75
0.7
±2
Top View (Near-side)
Side View
Bottom View (Far-side)
Max Unit
3.1 GHz
Ω
Ω
dB
1.0
dB
1.0
dB
±5 Degrees
2
Watts
+85
ºC
.079±.004
[2.00±0.10]
.027±.002
[0.70±0.05]
.049±.004
[1.25±0.10]
.039 [0.98]
12
.026 [0.65]
3
6X .009
[0.22]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Orientation
Marker Denotes 6 5
4
Pin Designation
Pin Location
1 Unbalanced Port
6X .012
[0.30]
2 GND / DC Feed
+ RF GND
3 Balanced Port
4 Balanced Port
5 GND
6 NC
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]