BD0205F5050A00 Datasheet, PDF (1/4 Pages) Anaren Microwave – Ultra Low Profile 1608 Balun

Model BD0205F5050A00
Rev A
Ultra Low Profile 1608 Balun
50Ω to 50Ω Balanced
Description
The BD0205F5050A00 is a low profile sub-miniature balanced to unbalanced
transformer designed for differential input locations on data conversion devices such
as A to D and D to A converters. In an easy to use surface mount package covering
200 MHz to 500 MHz and with CMRR performances over 2x that of the incumbent
wire wound products, this transformer is optimized to offer improved SFDR
management during operation of the data converter device. The BD0205F5050A00
is ideal for high volume manufacturing and is higher performance and smaller form
factor than traditional wire wound transformers. The BD0205F5050A00 has an
unbalanced port impedance of 50Ω and a 50Ω balanced port impedance. This
transformation enables single ended signals to be applied to differential ports on the
data converter devices. The output ports have equal amplitude (-3dB) with 180
degree phase differential. The BD0205F5050A00 is available on tape and reel for
pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min. Typ. Max
Unit
• 200 – 500 MHz
• 0.74 mm Height Profile
• 50 Ohm to 2 x 25 Ohm
• Excellent CMRR
• Input to Output DC Isolation
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
200
500
50
50
11
13
MHz
Ω
Ω
dB
• Surface Mountable
Insertion Loss*
0.9
1.1
dB
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• Cascadable
• Configurable as UnUn
Amplitude Balance
Phase Balance
CMRR
Power Handling
0.2
0.6
dB
1
3
Degrees
36
dB
2
Watts
Transformer
Operating Temperature
-55
+85
ºC
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]