B4859A53 Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Small Low Profile 0603 Balun 50Ω to 100Ω Balanced

Model B4859A53
Rev A
Ultra Small Low Profile 0603 Balun
50Ω to 100Ω Balanced
Description
The B4859A53 is an ultra-small low profile balanced to unbalanced transformer
designed for differential inputs and output locations on next generation wireless
chipsets in an easy to use surface mount package covering 802.11a Uni-Band II and
Uni-Band III and the Japanese ISM band (4.9GHz). The B4859A53 is ideal for high
volume manufacturing and is higher performance than traditional ceramic baluns.
The B4859A53 has an unbalanced port impedance of 50Ω and a 100Ω balanced
port impedance. This transformation enables single ended signals to be applied to
differential ports on modern integrated chipsets. The output ports have equal
amplitude (-3dB) with 180 degree phase differential. The B4859A53 is available on
tape and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
• 4800 – 5900 MHz
Frequency
• 0.7mm Height Profile
• 50 Ohm to 2 x 50 Ohm
Unbalanced Port Impedance
• Covers 802.11a Uni-Band II & III ^{Balanced Port Impedance}
• Low Insertion Loss
Return Loss
• Input to Output DC Isolation Insertion Loss*
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Amplitude Balance
Phase Balance
CMRR
Power Handling
Min.
4800
12
Typ.
50
100
15
0.7
0.5
5
27
Max
5900
0.9
1.0
7
0.5
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
.063±.004
[1.60±0.10]
.027±.002
[0.69±0.05]
.034±.004
[0.86±0.10]
Orientation
Marker Denotes
Pin Location
Dimensions are in Inches [Millimeters]
Mechanical Outline
Pin Designation
1 Unbalanced Port
2 GND
3 Balanced Port 1
4 Balanced Port 2
5 GND
6 NC
12
.020
[0.50]
65
.020
[0.50]
3
.008
[0.20]
4 _.010
[0.25]
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]