B100NA20X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Chip Attenuator 100 Watts, 20 dB

Features:
• RoHS Compliant
• 100 Watts
• DC – 4.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Outline Drawing
ROHS
Compliant
Model B100NA20X4
Chip Attenuator
100 Watts, 20 dB
Description
The B100NA20X4 is high performance Aluminum Nitride (AlN) chip
attenuator intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
monitoring. The termination is also RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
AlN Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature -55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Attenuation Value:
20 dB, ± 1.0 dB, DC – 4.0 GHz
Power:
100 Watts
Frequency Range:
DC – 4.0 GHz
Return Loss
>20 dB to 2.7 GHz
>19 dB to 4.0 GHz
Value (A-B) Value (A-C) Value (B-C)
Tolerance
81.8 Ω
50.9 Ω
50.9 Ω
± 4%
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Available on Tape
and Reel For Pick and
Place Manufacturing.
B100NA20X4 (097) Rev. E pg.1 of 2
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]