|
B0430J50100AHF_14 Datasheet, PDF (1/5 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun 50 to 100 Balanced | |||
|
Model B0430J50100AHF
Rev A
Ultra Low Profile 0805 Balun
50⦠to 100⦠Balanced
Description
The B0430J50100AHF is a low cost, low profile sub-miniature unbalanced to
balanced transformer designed specifically for differential inputs and output
locations on next generation A to D and D to A Converter ICâs in an easy to use
surface mount package, covering 400 MHzâ3000 MHz. The B0430J50100AHF is
ideal for high volume manufacturing and delivers higher performance than traditional
wire wound baluns. The B0430J50100AHF has an unbalanced port impedance of
50⦠and a 100⦠balanced port impedance. This transformation enables single
ended signals to be applied to differential ports. The output ports have equal
amplitude (-3dB) with 180 degree phase differential. The B0430J50100AHF is
available on tape and reel for pick and place high volume manufacturing.
Note that for optimal performance, the B0430J50100AHF should be used with a 10
pF series capacitor on the unbalanced port as shown in p. 2 & 3.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min. Typ. Max
Unit
⢠400 â 3000 MHz
⢠0.7mm Height Profile
⢠50 Ohm to 2 x 50 Ohm
⢠Low Insertion Loss
⢠Designed for A-D and D-A
Converters
⢠Surface Mountable
⢠Tape & Reel
⢠Non-conductive Surface
⢠RoHS Compliant
⢠Halogen Free
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Power Handling
400
3000
MHz
50
â¦
100
â¦
8.4
9.9
dB
3.4
4.0
dB
0.7
1.4
dB
7
12
Degrees
25
dB
1
Watts
Operating Temperature
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
+85
ºC
Outline Drawing
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
0.70±0.05
4x 0.37
BOTTOM VIEW (Far Side)
1
2
3
2x 0.15
1.29±0.10
6x 0.98
6x
0.22
Orientation Marker
Denotes Pin Location
Orientation Marker
6
5
4
6x
Denotes Pin Location 4x 0.65
0.30
Mechanical Outline
-Dimensions are in Millimeters
-Tolerences are Non-Cumulative
Pin Designation
1 GND
2 Unbalanced Port
3 GND
4 Balanced Port
5 NC
6 Balanced Port
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
(315) 432-8909
(800) 411-6596
+44 2392-232392
+86 512-62749282
|
▷ |