B0430J50100AHF Datasheet, PDF (1/4 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun 50
to 100
Balanced

Model B0430J50100AHF
Rev C
Ultra Low Profile 0805 Balun
50Ω to 100Ω Balanced
Description
The B0430J50100AHF is a low cost, low profile sub-miniature unbalanced to
balanced transformer designed specifically for differential inputs and output
locations on next generation A to D and D to A Converter IC’s in an easy to use
surface mount package, covering 400 MHz–3000 MHz. The B0430J50100AHF is
ideal for high volume manufacturing and delivers higher performance than traditional
wire wound baluns. The B0430J50100AHF has an unbalanced port impedance of
50Ω and a 100Ω balanced port impedance. This transformation enables single
ended signals to be applied to differential ports. The output ports have equal
amplitude (-3dB) with 180 degree phase differential. The B0430J50100AHF is
available on tape and reel for pick and place high volume manufacturing.
Note that for optimal performance, the B0430J50100AHF should be used with a 10
pF series capacitor on the unbalanced port as shown in p. 2 & 3.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 400 – 3000 MHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 50 Ohm
• Low Insertion Loss
• Designed for A-D and D-A
Converters
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• Halogen Free
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
CMRR
Power Handling
Min.
400
8.4
Typ.
50
100
9.9
3.4
0.7
7
25
Max
3000
4.0
1.4
12
0.4
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
Operating Temperature
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
+85
ºC
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
0.64±0.06
4x 0.37
BOTTOM VIEW (Far Side)
1
2
3
2x 0.15
1.29±0.10
6x 0.98
6x
0.22
Orientation Marker
Denotes Pin Location
Orientation Marker
6
5
4
6x
Denotes Pin Location _{4x 0.65}
0.30
Mechanical Outline
-Dimensions are in Millimeters
Pin Designation
1 GND
2 Unbalanced
3 GND
4 Balanced Port
5 NC
6 Balanced Port
Visit us at
www.Anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
[phone]
[phone]
[phone]
[phone]