B0322J5050A00 Datasheet, PDF (1/5 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun

Model B0322J5050A00
Rev D
Ultra Low Profile 0805 Balun
50Ω to 50Ω Balanced
Description
The B0322J5050A00 is a low profile sub-miniature balanced to unbalanced
transformer designed for differential inputs and output locations on next generation
wireless chipsets in an easy to use surface mount package covering the GSM
frequency. The B0322J5050A00 is ideal for high volume manufacturing and is
higher performance than traditional ceramic and lumped element baluns. The
B0322J5050A00 has an unbalanced port impedance of 50Ω and a 50Ω balanced
port impedance. This transformation enables single ended signals to be applied to
differential ports on modern semiconductors. The output ports have equal amplitude
(-3dB) with 180 degree phase differential. The B0322J5050A00 is available on tape
and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min. Typ. Max
• 300 – 2200 MHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 25 Ohm
• Low Insertion Loss
• Input to Output DC Isolation
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
300
2200
50
50
12.2
16
• Surface Mountable
Insertion Loss*
1.3
1.6
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Amplitude Balance
Phase Balance
CMRR
1.1
1.2
17
20
15
Power Handling
2
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
Top View (Near-side)
Side View
Bottom View (Far-side)
.079±.004
[2.00±0.10]
.027±.002
[0.70±0.05]
12
.026±.004 [0.65±0.10]
3
Orientation
Marker Denotes
Pin Location
.049±.004
[1.25±0.10]
Dimensions are in Inches [Millimeters]
Mechanical Outline
6X .008
[0.20]
Orientation
Marker Denotes 6 5
4
Pin Location _{6X .012}
Pin Designation
[0.30]
1 Unbalanced Port
2 GND
3 Balanced Port
4 Balanced Port
5 Do not connect
6 NC
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]