B0310J50100A00 Datasheet, PDF (1/5 Pages) Anaren Microwave – Ultra Low Profile 0805 Balun

Model B0310J50100A00
Rev B
Ultra Low Profile 0805 Balun
50Ω to 100Ω Balanced
Description
The B0310J50100A00 is a low cost, low profile sub-miniature unbalanced to
balanced transformer designed for differential inputs and output locations on modern
chipsets in an easy to use surface mount. The B0310J50100A00 is ideal for high
volume manufacturing and delivers higher performance than traditional wire wound
baluns. The B0310J50100A00 has an unbalanced port impedance of 50Ω and a
100Ω balanced port impedance*. This transformation enables single ended signals
to be applied to differential ports on modern integrated chipsets. The output ports
have equal amplitude (-3dB) with 180 degree phase differential. The
B0310J50100A00 is available on tape and reel for pick and place high volume
manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 300 – 1000 MHz
• 0.7mm Height Profile
• 50 Ohm to 2 x 50 Ohm
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
Min.
300
8.1
Typ.
50
100
9.4
0.8
2.5
34
Max
1000
1.0
2.8
36
CMRR
9
Power Handling
2
Operating Temperature
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
Top View (Near-side)
Side View
Bottom View (Far-side)
.079±.004
[2.00±0.10]
.027±.002
[0.70±0.05]
12
.026±.004 [0.65±0.10]
3
Orientation
Marker Denotes
Pin Location
.049±.004
[1.25±0.10]
Dimensions are in Inches [Millimeters]
Mechanical Outline
6X .008
[0.20]
Orientation
Marker Denotes 6 5
4
Pin Location _{6X .012}
Pin Designation
[0.30]
1 Unbalanced Port
2 GND
3 Balanced Port
4 Balanced Port
5 Do not connect
6 NC
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]