B0205F50200AHF Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 1608 Balun 50 to 200 Balanced

Model B0205F50200AHF
Rev A
Ultra Low Profile 1608 Balun
50Ω to 200Ω Balanced
Description
The B0205F50200AHF is a low profile sub-miniature balanced to unbalanced
transformer designed for differential input locations on data conversion devices (A to
D converters). In an easy to use surface mount package covering 200 MHz to 500
MHz and superior CMRR performance, this transformer is optimized to offer
improved SFDR management during operation of the data converter device. The
B0205F50200AHF is ideal for high volume manufacturing and is higher performance
and smaller form factor than traditional wire wound transformers. The
B0205F50200AHF has an unbalanced port impedance of 50Ω and a 200Ω balanced
port impedance. This transformation enables single ended signals to be applied to
differential ports on the data converter devices. The output ports have equal
amplitude (-3dB) with 180 degree phase differential. The B0205F50200AHF is
available on tape and reel for pick and place high volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
• 125 –700 MHz (IL 3dB BW)
• 200 – 500 MHz (IL 1dB BW)
• 0.83 mm Height Profile
• 50 Ohm to 2 x 100 Ohm
• Excellent CMRR
Parameter
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
Return Loss
Min. Typ. Max
200
500
50
200
13.9
17.7
Unit
MHz
Ω
Ω
dB
• Input to Output DC Isolation Insertion Loss*
1.3
1.6
dB
• Surface Mountable
• Tape & Reel
• Non-conductive Top Surface
• RoHS Compliant
• Halogen Free
Amplitude Balance
Phase Balance
CMRR
Power Handling
Operating Temperature
-55
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
0.1
1.3
38.2
0.4
dB
3.1
Degrees
dB
2
Watts
+85
ºC
Top View (Near-side)
Side View
Bottom View (Far-side)
4.10±.10
.89±.08
4x .955
1
2
3
10
4
2.10±.10
9
2x .350
5
4x .280
4x .350
Orientation
Marker
Mechanical Outline
Dimensions are in Millimeters
Pin Designation
1 ^Input
2 NC
3 Open
4 GND
5 GND
Orientation
Marker
Pin Designation
6 ^{Balanced port 1}
7 NC
8 Balanced port 2
9 GND
10 GND
10x .300
10x .220
8
7
6
Visit us at
www.anaren.com
USA/Canada:
Toll Free:
Europe:
Asia:
[phone]
[phone]
[phone]
[phone]