B0110E50200AHF Datasheet, PDF (1/6 Pages) Anaren Microwave – Ultra Low Profile 1008 Balun

Model B0110E50200AHF
RevA
Ultra Low Profile 1008 Balun
50Ω to 200Ω Balanced
Description
The B0110E50200AHF is a low profile sub-miniature balanced to
unbalanced transformer designed for differential inputs and output locations
on next generation digital TV chipsets in an easy to use surface mount
package. The B0110E50200AHF is ideal for high volume manufacturing and
is higher performance than traditional wire wound Baluns. The
B0110E50200AHF has an unbalanced port impedance of 50Ω and 200Ω
balanced port impedance. This transformation enables single ended signals
to be applied to differential ports on modern semiconductors. The output ports
have equal amplitude (-3dB) with 180 degree phase differential. The
B0110E50200AHF is available on tape and reel for pick and place high
volume manufacturing.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
• 50 – 1450 MHz (IL 2dB BW)
• 85-13000 MHz ( IL 1dB BW)
• 0.83 mm Height Profile
• 50 Ohm to 2 x 100 Ohm
Frequency
Unbalanced Port Impedance
Balanced Port Impedance
• Excellent CMRR (30dB typical) ^{Return Loss}
• Surface Mountable
Insertion Loss*
• Tape & Reel
• Non-conductive Top Surface
• RoHS Compliant
• Halogen Free
Amplitude Balance
Phase Balance
CMRR
Power Handling
Min.
50
8
Typ.
50
200
9.8
2.2
0.4
5.6
26
Max
1450
2.5
0.8
8
0.5
Min.
85
11
Typ.
50
200
12.3
1.2
0.4
2.6
30
Max
1300
1.5
0.8
4
0.5
Unit
MHz
Ohm
Ohm
dB
dB
dB
Degrees
dB
Watts
Operating Temperature
-55
+85 -55
+85
ºC
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.15 dB higher at +85 ºC). All performances stated for recommended
operation with external circuitry.
Top View (Near-side)
2.54±.10
2.04±.10
ORIENTATION
MARKER
Side View
.83±.08
Bottom View (Far-side)
1 23
4x .205
10
9
4x .280
ORIENTATION
MARKER
4
2x .350
5
10x .220
10x .300
876
Mechanical Outline
Dimensions are in Milimeters
Pin Designation
1 Input
2 GND
3 NC
4 GND
5 GND
Pin Designation
6 Balanced Port 1
7 GND
8 Balanced Port 2
9 GND
10 GND
Outline Drawing
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]