A50A50X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Chip Termination 50 Watts, 50Ω

Features:
• RoHS Compliant
• 50 Watts
• DC – 4.0GHz
• Al₂O₃ Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Outline Drawing
ROHS
Compliant
Model A50A50X4
Chip Termination
50 Watts, 50Ω
Description
The A50A50X4 is high performance Alumina (Al₂O₃) chip termination
intended as a low cost alternative to Beryllium Oxide (BeO) and
Aluminum Nitride (AlN). The termination is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS.
The high power handling makes the part ideal for terminating circulators
and for use in power combiners. The termination is also RoHS
compliant!
General Specifications
Resistive Element
Thick film
Substrate
Terminal Finish
Al₂O₃ Ceramic
Matte Tin over Nickel Barrier
Operating Temperature -55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms ± 2%
Power:
50 Watts
Frequency Range:
DC – 3.5GHz
Return Loss
>26 dB DC - 2.7 GHz
>20 dB DC - 3.5 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
A50A50X4 (097) rev.F pg. 1 of 2
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]