A500N50X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – RoHS Compliant

Features:
• RoHS Compliant
• 500 Watts
• DC – 1.7 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model A500N50X4
Description
Chip Termination
500 Watts, 50Ω
The A500N50X4 is high performance Aluminum Nitride (AlN) chip
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The high power handling makes the part ideal for terminating
circulators and for use in power combiners. The termination is also RoHS
compliant!
General Specifications
Resistive Element
Thick Film
Substrate
AlN Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature -55 to +200°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
500 Watts
Frequency Range:
DC – 1.7GHz
Return Loss
>20dB
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
USA/Canada:
Toll Free:
Europe:
1 of 2
[phone]
[phone]
[phone]