A16A50X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Chip Termination 16 Watts, 50Ω

Features:
• RoHS Compliant
• 16 Watts
• DC – 4.0 GHz
• Al₂O₃ Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Outline Drawing
ROHS
Compliant
Model A16A50X4
Chip Termination
16 Watts, 50Ω
Description
The A16A50X4 is high performance Alumina (Al₂O₃) chip termination
intended as a low cost alternative to Beryllium Oxide (BeO) and
Aluminum Nitride (AlN). The termination is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS.
The medium power handling makes the part ideal for terminating
circulators and for use in power combiners. The termination is also
RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
Al₂O₃ Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature -55 to +150°C (see de-rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
16 Watts
Frequency Range:
DC – 4.0 GHz
> 28 dB to 2.2 GHz
Return Loss
> 25 dB to 2.7 GHz
> 20 dB to 4.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Available on Tape
and Reel For Pick and
Place Manufacturing.
A16A50X4 (097) rev.E pg.1of 2
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]