A150N50X4E Datasheet, PDF (1/2 Pages) Anaren Microwave – RoHS Compliant

Features:
• RoHS Compliant
• 150 Watts
• DC – 3.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model A150N50X4E
Description
Chip Termination
150 Watts, 50Ω
The A150N50X4E is high performance Aluminum Nitride (AlN) chip
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
AlN Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature
-50 to +200°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
150 Watts
Frequency Range:
DC –3.0 GHz
Return Loss
25dB DC – 2.0 GHz
20dB DC – 3.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]