A150N50X4C Datasheet, PDF (1/2 Pages) Anaren Microwave – 150 Watts

Features:
• RoHS Compliant
• 150 Watts
• DC – 3.0 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
Model A150N50X4C
Description
Chip Termination
150 Watts, 50Ω
The A150N50X4C is high performance Aluminum Nitride (AlN) chip
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). It is well suited to all cellular frequency bands such as; AMPS,
GSM, DCS, PCS, PHS and UMTS. The high power handling makes the
part ideal for terminating circulators, and for use in power combiners. The
termination is also RoHS compliant!
General Specifications
Resistive Element
Substrate
Terminal Finish
Thick film
AlN Ceramic
Matte Tin over Nickel Barrier
Operating Temperature -55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
150 Watts
Frequency Range:
DC – 3.0 GHz
Return Loss
>26dB
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES (mm)
pg1 of 2
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]