A100N50X4 Datasheet, PDF (1/2 Pages) Anaren Microwave – Chip Termination 100 Watts, 50W

Features:
• RoHS Compliant
• 100 Watts
• DC - 2.7 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
• Small Size
Outline Drawing
Model A100N50X4
Chip Termination
100 Watts, 50Ω
Description
The A100N50X4 is high performance Aluminum Nitride (AlN) chip
termination intended as an alternative to Beryllium Oxide (BeO). The
termination is well suited to all cellular frequency bands such as; AMPS,
GSM, DCS, PCS, PHS and UMTS. The high power handling makes the
part ideal for terminating circulators and for use in power combiners. The
termination is also RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
AlN Ceramic
Terminal Finish
Matte Tin over Nickel Barrier
Operating Temperature -55 to +150°C (See de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
100 Watts
Frequency Range:
DC – 2.7 GHz
V.S.W.R.
1.1:1 to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
SIDE VIEW
TOP VIEW
.040
.250
.225
.045
.130
.058
ALL DIMENSIONS IN INCHES
Available on Tape
and Reel For Pick and
Place Manufacturing.
A100N50X4 (097) Rev B
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]