7A0124 Datasheet, PDF (1/1 Pages) Anaren Microwave – Mixers Balanced, OrthoQuad

Model 7A0124
Mixers
Balanced, OrthoQuad^®
Applications
• Down Converters
• Demodulators
• Pulse Modulators
• Current Controlled Attenuators
• Phase, Frequency Discriminators
Features
• Military Grade
• Good LO/RF Isolation
• Connectors Per
MIL-C-39012
• Low Conversion Loss
• Good Intermodulation
Performance
• Good LO/RF VSWR
Outline Drawing
Electrical Specifications
Frequency
GHz
0.5 - 1.0
Isolation LO-RF
dB Min/Typ
20/25
Convers. Loss
dB Max/Typ
7.5/6.5
VSWR RF, LO
Max/Typ :1
1.6/1.2
Noise Fig.¹
dB Max
8.5/7.5
IF Freq.²
MHz
DC-150
Note: Impedance: 50 ohms nominal. Operating temperature -54 to +95°C. LO drive of +8 dBm. All measurements
are made in 50 ohm system. For biased models, conversion loss and noise figures specify @ 0 dBm LO power.
Mixers have internal bias networks that allow operation over LO dynamic range ≥ 20 db while maintaining optimum
conversion loss.
Electrical and Mechanical Specifications subject to change without notice.
1_{Noise figure is single sideband using a 30 MHz amplifier having a noise of 1.5 dB.} 2 _{Upper IF frequency is the -}
3dB response point.
6.6.12
NOTES:
1. CONNECTORS: SMA FEMALE
PER MIL-C-39012. TYP. (3) PLACES
2. MARKING PER MIL-STD-130
3. FINISH:
PRIMER, EPOXY PAINT, EPOXY BLUE
4. DIMENSIONS ARE IN INCHES
Sales Desk USA: Voice: [phone] Fax: [phone]
Sales Desk Europe: Voice: ([phone] Fax: [phone]