|
60120A25X50-2 Datasheet, PDF (1/2 Pages) Anaren Microwave – RoHS Compliant | |||
|
Features:
⢠RoHS Compliant
⢠10 Watts
⢠DC â 6.0 GHz
⢠Al203 Ceramic
⢠Non - Nichrome Resistive
Element
⢠Low VSWR
⢠100% Tested
⢠Small Size
Outline Drawing
Model 060120A25X50-2
Description
Chip Termination
10 Watts, 50Ω
The 060120A25X50-2 is high performance Alumina (Al203) Chip
termination intended as a low cost alternative to Aluminum Oxide (AlN).
The termination is well suited to all cellular frequency bands such as;
AMPS, GSM, DCS, PCS, PHS and UMTS.. The termination is also
RoHS compliant!
General Specifications
Resistive Element
Thick film
Substrate
Terminal Finish
Al2O3 Ceramic
Matte Tin over Nickel Barrier
Operating Temperature -55 to +125°C (see de rating chart)
Tolerance is ±0.010â, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
50 Ohms, ± 2%
Power:
10 Watts
Frequency Range:
DC â 6.0 GHz
Return Loss
>19 dB to 6.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
|
▷ |