|
3A412S Datasheet, PDF (1/2 Pages) Anaren Microwave – Balun Transformers 50 to 12.5 Balanced | |||
|
Model 3A412S
Rev A
Balun Transformers
50 to 12.5 Balanced
Features:
⢠800 â 1000 MHz
⢠180° Transformer
⢠50 Ohm to 2 x 12.5+j Ohm
⢠Low Insertion Loss
⢠High Power
⢠Even Order Suppression
⢠Input to Output DC Isolation
⢠Surface Mountable
⢠Tape & Reel
⢠Convenient Package
⢠Lead Free
Outline Drawing
Description
The 3A412S is a low profile balanced to unbalanced transformer designed for push-
pull amplifiers in an easy to use surface mount package for AMPS and GSM. These
compact Xinger® surface mount baluns are ideal for high volume manufacturing
and are more reliable and repeatable than traditional baluns. The 3A412S has an
unbalanced port impedance of 50⦠and balanced port impedances of 12.5⦠to
ground with a 25⦠balance between outputs. This eases the matching of the push-
pull amplifierâs power transistors, which have low impedance levels. The output
ports have equal amplitude (-3dB) with 180 degree phase differential. The Xinger®
balun is a result of years of research and development culminating with a solution
so unique, a patent is pending on the design approach. The 3A412S is available on
tape and reel for pick and place high volume manufacturing.
ELECTRICAL SPECIFICATIONS***
Frequency
Unbalanced
Port
Impedance
Balanced
Port
Impedance*
MHz
Ohms
Ohms
Return
Loss
dB min
Insertion
Loss
dB max
800-1000
50
12.5+j
15
0.48
869-894
50
12.5+j
15
0.35
925-960
50
12.5+j
15
0.40
Amplitude
Balance
Phase
Balance
Power
Handling
ÎJC
Operating
Temp.
dB max
Degrees max
Watts
ºC / Watt
ºC
0.40
180± 5.0
250
3.8
-55 to +85
0.40
180± 5.0
250
3.8
-55 to +85
0.40
180± 5.0
250
3.8
-55 to +85
***Specification based on performance of unit properly installed on microstrip printed circuit
boards with 50 ⦠nominal impedance. Specifications subject to change without notice.
**Insertion Loss excludes reflected power. * 12.5⦠reference to ground
Pin 2
Top View (Near-side)
Side View
1.000±.010
[25.40±0.25]
.075±.008
[1.91±0.20]
Pin 3
Bottom View (Far-side)
.060±.004 [1.52±0.10]
Pin 3
.400±.004 [10.16±0.10]
.070±.008 [1.78±0.20]
Pin 2
GND
.750±.010
[19.05±0.25]
.050±.008
[1.27±0.20]
.030±.004
[0.76±0.10]
.030±.004 TYP
[0.76±0.10]
.050±.008
[1.27±0.20]
Pin 1
Denotes
Array Number
Dimensions are in Inches [Millimeters]
3A412S Mechanical Outline
GND
Pin 1
.115±.004 [2.92±0.10]
.358±.008 [9.09±0.20]
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
|
▷ |