3A325 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Surface Mount Balun

Model 3A325
Rev. B
Xinger Balun
50Ω to 25Ω Balanced
Description
The 3A325 is a low profile balanced to unbalanced transformer designed for push-
pull amplifiers in an easy to use surface mount package for NMT450 and TV
broadcast applications. These compact Xinger® surface mount baluns are ideal for
high volume manufacturing and are more reliable and repeatable than traditional
baluns. The 3A325 has an unbalanced port impedance of 50Ω and balanced port
impedances of 25Ω to ground with a 50Ω balance between outputs. This eases the
matching of the push-pull amplifier’s power transistors, which have low impedance
levels. The output ports have equal amplitude (-3dB) with 180 degree phase
differential. The Xinger® balun is a result of years of research and development
culminating with a solution so unique, a patent is pending on the design approach.
The 3A325 is available on tape and reel for pick and place high volume
manufacturing.
Features:
• 470 – 860 MHz
• 180° Transformer
• 50 Ohm to 25 Ohm
• Broad Band
• Low Insertion Loss
• High Power
• Even Order Harmonic
Suppression
• Input to Output DC Isolation
• Surface Mountable
• Tape & Reel
• Convenient Package
Outline Drawing
ELECTRICAL SPECIFICATIONS***
Unbalanced Balanced
Frequency
Port
Port
Impedance Impedance*
MHz
Ohms
Ohms
470 - 860
50
25
Return
Loss
dB min
10
Insertion
Loss**
dB max
0.65
Amplitude
Balance
Phase
Balance
Power
Handling
ΘJC
Operating
Temp.
dB max
Degrees max
Watts
ºC / Watt
ºC
0.5
180+ 5.0
275
4.4
-55 to +85
***Specification based on performance of unit properly installed on microstrip printed circuit
boards with 50 Ω nominal impedance. Specifications subject to change without notice.
**Insertion Loss specification excludes reflected power. *25Ω reference to ground
Top View (Near-side)
Side View
Botttom View (Far-side)
.750±.010
[19.05±0.25]
Pin 2
.076±.008
[1.93±0.20]
Pin 2
Pin 1
GND
Denotes
Array Number
.870±.010
[22.10±0.25]
.023±.004
[0.58±0.10]
GND
Pin 3
.134±.008 [3.40±0.20]
Pin 3
Dimensions are in Inches [Millimeters]
3A325 Rev A Mechanical Outline
.023±.004
[0.58±0.10]
.064±.008
[1.63±0.20]
Pin 1
.129±.004 [3.28±0.10]
.450±.008 [11.44±0.20]
.044±.008
[1.12±0.20]
.027±.004 TYP
[0.69±0.10]
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]